We focuses professionally on the field of auto service repair and hand tools. Contact: info@taiwanautotools.com
The cranked long handle on this oil filter wrench gives access to confined spaces.
Diameter size range 60 mm – 105 mm.
Flexible handle for narrow space.
Double width chain for strength.
Length of chain: 350 mm.
Available for all type of oil filter.
Vacuum Brake Fluid Bleeder 6.0L
TATLY506
Item Description
Capacity: 6 liter
Use standard workshop air supply
Removes fluid via bleed nipples to allow bleeding or entire fluid replacement
Material: PE (Polyethylene)
Weight: 2.9kg
• Brake fluid bleeder for the extraction of brake fluid on wheel brake cylinders, brake calipers, also suitable for ABS brakes.
• By means of compressed air the integrated Venturi-system creates a vacuum, enabling thus the bleeding of the brake system.
• With universal plastic nozzle, suitable for all common vehicle types and a clear transparent hose enables easy visual check.
Vacuum Brake Fluid Bleeder 1.0L
TATLY507
Item Description
Capacity: 1 liter
Use standard workshop air supply
Removes fluid via bleed nipples to allow bleeding or entire fluid replacement
Material: PE (Polyethylene)
Weight: 620g
• Brake fluid bleeder for the extraction of brake fluid on wheel brake cylinders, brake calipers, also suitable for ABS brakes.
• By means of compressed air the integrated Venturi-system creates a vacuum, enabling thus the bleeding of the brake system.
• With universal plastic nozzle, suitable for all common vehicle types and a clear transparent hose enables easy visual check.
Pneumatic Fluid Extractor 10L
TATLYGP10A
Item Description
Air supply: 70~100 PSI (5~8 Bar)
Air consumption: 180 L/min
Vacuum (Max.): 500 mmHG
Reservoir capacity: 10 L
Extraction rate: 2.5 L/min
Air inlet size: 1/4″ BSP
Open the air switch to begin the extraction. Close the air switch to stop extracting the fluid. The fluid extractor can be used to drain brake fluid, waste oil from the sump (down the dipstick tube), other automotive applications and pick up non corrosive spillage.
A: 6 mm steel oil suction tube
B: 3/8″ gear oil tube
C: suction hose for brake fluid 5×8 mm
D: 6 mm oil suction tube for motorbike
E: 5/16″ oil suction tube for motorbike
The Clean Syringe for Vehicle Oil Change 1.5L
TATLYJI1500
Item Description
Rotative switch off, Capacity: 1,5 L
Transparent design to visualise the fluid.
Suitable for fluid suction and supply in vehicle service.
Designed for gear oil and lubrication.
Features cap to avoid dripping.
The Clean Syringe for Vehicle Oil Change 200cc
TATLYJI200
Item Description
Quick disconnect tube, Capacity: 200cc
Transparent design to visualise the fluid.
Suitable for fluid suction and supply in vehicle service.
Designed for brake fluids and antifreeze.
Features cap to avoid dripping.
Heavy Duty Transmission Oil Filler with Adaptor Set 8pc
TATLYK10A2
Item Description
This tool is designed to fill fluid in transmission and differentials.
AT 101: Ford 1/8 NPT
AT 102: Universal Nozzle (BMW, Honda, Nissan and ETC)
AT 103: VW, Audi
AT 104: VW, Audi, Porsche
AT 105: VW, Audi, Mini Cooper 10×1.0
AT 106: Benz 722.9 12×1.5
AT 107: VW, Audi DSG 24×1.5
AT 108: VW, Audi CVT 22×1.5
Operating Instructions:
1. Open the filling cap on the reservoir. Fill reservoir with fluid to be dispensed, max. capacity is 7.5 Litres.
2. Find correct adaptor from the selection included and connect to the vehicle being worked on.
3. Connect the adaptor to the dispensing hose.
4. Pump the dispensing handle to commence filling.
Specification:
Viscosity Range: up to SAE 140
Output capacity: 70 cc / cycle
Taiwan Auto Tools 